|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD 91785A IRG4IBC20W INSULATED GATE BIPOLAR TRANSISTOR Features * Designed expressly for Switch-Mode Power Supply and PFC (power factor correction) applications * 2.5kV, 60s insulation voltage V * Industry-benchmark switching losses improve efficiency of all power supply topologies * 50% reduction of Eoff parameter * Low IGBT conduction losses * Latest-generation IGBT design and construction offers tighter parameters distribution, exceptional reliability * Industry standard Isolated TO-220 FullpakTM outline C VCES = 600V G E VCE(on) typ. = 2.16V @VGE = 15V, IC = 6.5A n-channel Benefits * Lower switching losses allow more cost-effective operation than power MOSFETs up to 150 kHz ("hard switched" mode) * Of particular benefit to single-ended converters and boost PFC topologies 150W and higher * Low conduction losses and minimal minority-carrier recombination make these an excellent option for resonant mode switching as well (up to >>300 kHz) TO-220 FULLPAK Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM VGE EARV PD @ TC = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Breakdown Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Q Clamped Inductive Load Current R Gate-to-Emitter Voltage Reverse Voltage Avalanche Energy S Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds Mounting torque, 6-32 or M3 screw. Max. 600 11.8 6.2 52 52 20 200 34 14 -55 to + 150 300 (0.063 in. (1.6mm) from case ) 10 lbf*in (1.1N*m) Units V A V mJ W C Thermal Resistance Parameter RJC RJA Wt Junction-to-Case - IGBT Junction-to-Ambient, typical socket mount Weight Typ. --- --- 2.0 (0.07) Max. 3.7 65 --- Units C/W g (oz) www.irf.com 1 12/30/00 IRG4IBC20W Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)CES V(BR)ECS Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 -- Emitter-to-Collector Breakdown Voltage T 18 -- V(BR)CES/TJ Temperature Coeff. of Breakdown Voltage -- 0.48 -- 2.16 VCE(ON) Collector-to-Emitter Saturation Voltage -- 2.55 -- 2.05 VGE(th) Gate Threshold Voltage 3.0 -- VGE(th)/TJ Temperature Coeff. of Threshold Voltage -- -8.8 gfe Forward Transconductance U 5.5 8.3 -- -- ICES Zero Gate Voltage Collector Current -- -- -- -- IGES Gate-to-Emitter Leakage Current -- -- Max. Units Conditions -- V VGE = 0V, IC = 250A -- V VGE = 0V, IC = 1.0A -- V/C VGE = 0V, IC = 1.0mA 2.6 IC = 6.5A VGE = 15V -- IC = 13A See Fig.2, 5 V -- IC = 6.5A , TJ = 150C 6.0 VCE = VGE, IC = 250A -- mV/C VCE = VGE, IC = 250A -- S VCE = 100 V, IC = 6.5A 250 VGE = 0V, VCE = 600V A 2.0 VGE = 0V, VCE = 10V, TJ = 25C 1000 VGE = 0V, VCE = 600V, TJ = 150C 100 nA VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Ets LE Cies Coes Cres Notes: Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Min. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ. Max. Units Conditions 26 38 IC = 6.5A 3.7 5.5 nC VCC = 400V See Fig.8 10 15 VGE = 15V 22 -- 14 -- TJ = 25C ns 110 160 IC = 6.5A, VCC = 480V 64 96 VGE = 15V, RG = 50 0.06 -- Energy losses include "tail" 0.08 -- mJ See Fig. 9, 10, 14 0.14 0.2 21 -- TJ = 150C, 15 -- IC = 6.5A, VCC = 480V ns 150 -- VGE = 15V, RG = 50 150 -- Energy losses include "tail" 0.34 -- mJ See Fig. 10, 11, 14 7.5 -- nH Measured 5mm from package 490 -- VGE = 0V 38 -- pF VCC = 30V See Fig. 7 8.8 -- = 1.0MHz Q Repetitive rating; VGE = 20V, pulse width limited by max. junction temperature. ( See fig. 13b ) R VCC = 80%(VCES), VGE = 20V, L = 10H, RG = 50, (See fig. 13a) T Pulse width 80s; duty factor 0.1%. U Pulse width 5.0s, single shot. Vt = 60s, f = 60Hz S Repetitive rating; pulse width limited by maximum junction temperature. 2 www.irf.com IRG4IBC20W 25 F o r b o th : Tria n g u la r w a ve : 20 Duty cycle: 50% TJ = 125 C Tsink = 90C G ate drive as specified Po w e r D is s ip a tio n = 1 3 W C la m p vo lta g e : 8 0 % o f ra te d Load Current ( A ) 15 S qu are wave: 6 0 % o f ra te d v o lta g e 10 5 Id e al d io de s 0 0.1 1 10 100 A 1000 f, Frequency (kH z) Fig. 1 - Typical Load Current vs. Frequency (Load Current = IRMS of fundamental) 100 100 I C , Collector-to-Emitter Current (A) I C , Collector-to-Emitter Current (A) TJ = 150 C 10 10 TJ = 150 C TJ = 25 C V = 15V 20s PULSE WIDTH GE 1 10 TJ = 25 C V = 50V 5s PULSE WIDTH CC 5 6 7 9 10 11 1 1 VCE , Collector-to-Emitter Voltage (V) VGE , Gate-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics www.irf.com 3 IRG4IBC20W 12 3.0 8 VCE , Collector-to-Emitter Voltage(V) Maximum DC Collector Current(A) V = 15V 80 us PULSE WIDTH GE IC = 13 A IC = 6.5 A 2.0 IC = 3.25 A 4 0 25 50 75 100 125 150 1.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 TC , Case Temperature ( C) TJ , Junction Temperature ( C) Fig. 4 - Maximum Collector Current vs. Case Temperature Fig. 5 - Typical Collector-to-Emitter Voltage vs. Junction Temperature 10 Thermal Response (Z thJC ) 1 D = 0.50 0.20 0.10 0.05 0.1 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) 0.0001 0.001 0.01 0.01 0.00001 Notes: 1. Duty factor D = t 1 / t2 2. Peak T = PDM x Z thJC + TC J 0.1 P DM t1 t2 1 t1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4IBC20W 1000 800 VGE , Gate-to-Emitter Voltage (V) VGE = 0V, f = 1MHz Cies = Cge + Cgc , Cce SHORTED Cres = Cgc Coes = Cce + Cgc 20 VCC = 400V I C = 6.5A 16 C, Capacitance (pF) 600 Cies 12 400 8 200 C oes C res 4 0 1 10 100 0 0 5 10 15 20 25 30 VCE , Collector-to-Emitter Voltage (V) Q G , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 0.15 Total Switching Losses (mJ) Total Switching Losses (mJ) V CC V GE TJ IC = 480V = 15V = 25 C = 6.5A 10 50 RG = Ohm VGE = 15V VCC = 480V 0.14 1 IC = 13 A IC = 6.5 A IC =3.25 A 0.13 0.1 0.12 0 10 20 30 40 50 0.01 -60 -40 -20 0 20 40 60 80 100 120 140 160 RG , Gate Resistance (Ohm) TJ , Junction Temperature C ) ( Fig. 9 - Typical Switching Losses vs. Gate Resistance Fig. 10 - Typical Switching Losses vs. Junction Temperature www.irf.com 5 IRG4IBC20W 0.8 0.6 I C , Collector-to-Emitter Current (A) Total Switching Losses (mJ) RG TJ VCC VGE = 50 Ohm = 150 C = 480V = 15V 100 VGE = 20V T J = 125 o C 0.4 10 0.2 0.0 0 2 4 6 8 10 12 SAFE OPERATING AREA 1 14 1 10 100 1000 I C , Collector-to-emitter Current (A) VCE , Collector-to-Emitter Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current Fig. 12 - Turn-Off SOA 6 www.irf.com IRG4IBC20W L 50V 1 000V VC * 0 - 480V D .U .T. RL = 480V 4 X IC@25C 480F 960V Q R * D river sam e type as D.U.T .; Vc = 80% of Vce(m ax) * N ote: Due to the 50V pow er supply, pulse w idth and inductor w ill increase to obtain rated Id. Fig. 13a - Clamped Inductive Load Test Circuit Fig. 13b - Pulsed Collector Current Test Circuit IC L D river* 50V 1000V Q * Driver same type as D.U.T., VC = 480V D .U .T. VC Fig. 14a - Switching Loss Test Circuit R S Q R 90% S 10% 90% VC t d (o ff) Fig. 14b - Switching Loss Waveforms 10% I C 5% t d (o n ) tr E on E ts = (E o n +E o ff ) tf t=5s E o ff www.irf.com 7 IRG4IBC20W Case Outline TO-220 FULLPAK 1 0 .6 0 (.4 17 ) 1 0 .4 0 (.4 09 ) o 3.4 0 (.13 3) 3.1 0 (.12 3) -A3.7 0 (.145 ) 3.2 0 (.126 ) 4 .80 (.1 89 ) 4 .60 (.1 81 ) 2 .8 0 (.1 10 ) 2 .6 0 (.1 02 ) LE A D A S S IG N M E N TS LEAD ASSIGMENTS 1-G 1- GATE A TE 2 - D RA IN 2- COLLECTOR 3 - SOU 3- EMITTERRC E NOTES: 1 D IM E N S IO N IN G & TO LE R A NC ING P E R A N S I Y 14.5M , 1 98 2 7.10 (.28 0 ) 6.70 (.26 3 ) 1 6.0 0 (.63 0) 1 5.8 0 (.62 2) 1.1 5 (.0 45) M IN . 1 2 3 2 C O N TR O LL IN G D IM E N S IO N : IN C H . 3.3 0 (.130 ) 3.1 0 (.122 ) -B1 3.7 0 (.54 0) 1 3.5 0 (.53 0) C D A 1 .4 0 (.0 55) 3X 1 .0 5 (.0 42) 2.5 4 (.10 0 ) 2X 3X 0 .90 (.0 35) 0 .70 (.0 28) 0 .2 5 (.0 10) M AM B 3X 0.4 8 (.01 9) 0.4 4 (.01 7) B 2 .85 (.1 12 ) 2 .65 (.1 04 ) M IN IM U M C R E E P A G E D IS T A N C E B E TW E E N A -B -C -D = 4.8 0 (.189 ) IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 12/00 8 www.irf.com |
Price & Availability of IRG4IBC20W |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |